Bedienungsanleitung Xiaomi Mi Smart Space Heater S (Deutsch (2024)

FAQs

How to connect xiaomi heater to Wi-Fi? ›

1) Turn on the mechanical switch, touch the power on button to turn on the Xiaomi Smart Tower Heater Lite, and press and hold the mode adjustment button and timer adjustment button for 3s to reset the network, then the Xiaomi Smart Tower Heater Lite will enter the waiting connection state (Wi-Fi indicator flashes ...

Press the Wi-Fi reset/light button to enable or disable the light of the touch panel. Press and hold the button to reset the Wi-Fi connection of the heater. Once the Wi-Fi connection is reset successfully, the Wi-Fi indicator will blink and the heater will enter the awaiting connection mode.

Use the app to turn the heater on remotely. When the surrounding temperature is lower than the preset temperature, it will automatically continue heating; when the surrounding temperature reaches the preset temperature, it will automatically reduce the power or stop heating.

Close doors to rooms that are being heated to avoid heat loss. Turn off the heater when not in use or get a space heater with a timer feature. Purchase a heater with thermostat settings and use the lowest setting that you find comfortable.

Make sure your smart device is on the right frequency

Due to frequency compatibility issues, smart appliances often struggle to connect to home Wi-Fi networks. Most Wi-Fi routers offer 2.4 GHz and 5 GHz bands, but the majority of smart home devices only connect to the 2.4 GHz band.

It is recommended that you expose the phone to the air when charging, reduce the contact and wrapping of clothing and other fabrics, and ensure a good heat dissipation environment, which can effectively reduce the temperature.

Once smart heating components are installed, download an app (each smart heating manufacturer will have their own) and follow the instructions to connect it to the system. Most can also be connected to a smart speaker, such as Alexa or Google Home, so the system can be voice-controlled.

Space heaters are only meant to run for a few hours, and you should never leave one running overnight. The risk of it falling over, shorting out, or catching your room on fire are just too great. Relying on space heaters to heat your entire home is extremely dangerous.

Set the output dial during the day to release the stored heat. Turn it up for more heat and down for less heat. It doesn't matter what the input dial is set to during the day - it won't automatically store heat during peak times. During the morning and afternoon, try to set the output as low as you find comfortable.

Can I run a space heater all night? ›

You Should Not Leave Space Heaters on Unattended

We do not recommend using space heaters at all because of this risk, but you definitely should not use them at night. If your home is too cold at night, you may want to consider adjusting your thermostat to better meet your needs.

To conserve energy, the systems are set to an air temperature of 68-74F. This minimizes the amount of reheat energy needed. Increasing thermostat settings calls for the air handler to increase the amount of reheat, which uses more energy.

Never leave a space heater running for long periods of time, and especially not overnight; it is best to use them interimittently; depending on your situation, a suggested practice would be to turn it off/unplug it for 10 minutes every hour if you depend on its use for longer periods.